Recently Completed Projects

Client

Project Name

Project Description

(Details of Work)

• Chemical Cleaning and Hot Oil Flushing of Lube Oil System of Unit-3 of TGPP

• Chemical Cleaning & Flushing of Turbine oil System of Mt. Apo Geothermal Power Plant 2

• Mahanagdong Geothermal Power Plant Lube Oil Tank Cleaning

• Mt. Apo Geothermal Power Plant (MAGPP) Cooling Tower, Main Condenser and Gas Cooler Cleaning by Hydrojetting and Hydroblasting

• Chemical Cleaning and Hot Oil Flushing of Lube Oil Systemof Unit-3 of TGPP

→Chemical cleaning of pipeline & Hot oil flushing of pipeline& lube oil cooler

→Manual Tank cleaning of Main Oil Tank

→Waste Treatment and Disposal & filtering of used oil

• Supply of Technical services, Labor, Equipment, Materials & Chemicals for the Chemical Cleaning & Flushing of Turbine Oil System

→Perform flushing on the units using fresh water; Line-up the system; Establish piping loop for chemical cleaning; Isolate all piping/tubing connection from the equipment, control valves, beaings, housing, gear boxes, M.O.T., OST, Strainer, filters and instrumentations and cover all opening with plastic wrapper to prevent chemical contamination of the system; Conduct pneumatic testing to check the integrity of looping of chemical cleaning; Chemical cleaning using 3 micron filter bags; Manually cleaning of main oil and storage tanks; Line-up the valves and isolation /bypassed points for all flushing loop; Conduct Hot Oil Flushing at 60 degree; Reinstatement of the entire system; Refill main oil tank with fresh oil thru a 3 micron filter; Perform system oil flushing using lube oil pumps; Disposal of waste water with oil and chemicals.

• Total draining of all oil from the main oil tank using diaphragm pump and transfer to temporary container; Perform the following inspection, tests and record "as found data".

→Condition of lube oil, particle count, water content, viscosity& acidity level; Physical appearance of the main oil tank interior; Total volume of the tank; Remove sludge on the bottom surface of the tank. Gather & record the total weight of the sludge; Apply degreaser to totally remove dirt and oil on the internal surface of the main oil tank; Complete cleaning by wiping tank surface with lint-free cloth; Transfer excess oil from the temporary storage tank to used oil drums or maintain the 90% main oil tank value of oil; Filling of new oil, approximately 10% of the total main oil tank volume, to the temporary storage tank; Purify the oil to cleanliness of NAS 8 standard and 0.1% or 1000 ppm moisture content prior to filling back to the main oil tank.

• Mechanical Cleaning of Cooling Tower Distributon Pipes, Headers, HWP Discharge Line, Suction Pit, Main Condenser and Gas Cooler of MAGPP1

• Installation of an Air Separation (ASU) Plant at the Calamba Premiere International Park

• Chemical Cleaning of 4" Pipeline

• Chemical cleaning of 6" Pipe

• Chemical cleaning of process and buried pipelines

→Chemical cleaning for N2 pipelines from Backup system Nitrogen Gas at ALPI compound to 12" dia. SEMPHIL Nitrogen Gas Header under drawing MO3 including air pigging and nitrogen blanketing.

• Chemical cleaning by Soaking Method of 4" ø Schedule 40 carbon steel pipes

• Chemical Cleaning by Soaking Method of 6" Schedule 40 Carbon Steel Pipes

• Main Oil Tank Cleaning

• Lube Oil System Flushing/Filtering

• Transfer of Lube Oil from Main Oil Tank to temporary storage tank. Cleaning of Main Oil Tank Internals. Pumped back lube oil from temporary storage tank to main oil tank through 3-micron filter.

• Lube Oil Flushing/Filtering at BACMAN Geothermal Plant

• Hull 100 OK TEDI-Lube Oil

• Hull 100 OK TEDI

• Hull 100 OK TEDI

• Hull 100 OK TEDI

• Hull 100 OK TEDI

• Hull 102 BRAS SETE - 1

• Hull 100 OK TEDI

• Water Flushing of Fresh Water Cooling Piping System and Chemical Cleaning & Hot Oil Flushing of Lube Oil & Fuel Oil Piping System.

• Chemical Cleaning & Hot Oil Flushing of Fuel Oil Piping System

• Chemical Cleaning and Hot Oil Flushing of Hydraulic Oil Transfer Line

• Chemical Cleaning & Hot Oil Flushing of Cargo Hatch Hydraulic Oil Piping System

• Fabrication, Installation and hydro testing of Piping Systems

• Fabrication, welding and erection of pipes, pipe spools, supports, doublers, and penetration pieces; Installation and testing of all pipes, valves and fittings including final hook-up to the equipment.

• Chemical Cleaning of Cargo Fuel Oil Piping System and Fuel Oil Transfer and Service Piping System

Cleaning/Hydrojetting of the following vessels:

→Pre-Evaporator

→Evap Cell No. 1-4

→Heaters No. 1-4